PENTEK Traditional In-Line filters feature coconut shell, granular activated carbon, and are designeTd to reduce unwanted taste, odor and chlorine taste and odor.
Reduces chlorine taste and odor and inhibits limescale growth in residential and commercial applications
Coconut shell GAC and polyphosphate crystals in a polypropylene body
Estimated capacity of 1700 gallons at a flow rate of 0.75 gpm
Maximum pressure of 125 psi
Maximum temperature of 100 degrees F (37.8 degrees C)
This Pentek TS101L in-line carbon filter cartridge reduces chlorine and inhibits the growth of limescale in residential and commercial drinking water applications. It is made of coconut shell based granular activated carbon (GAC) and polyphosphate crystal media in a polypropylene body with polypropylene pre- and post-filters. The filter will reduce free available chlorine (FAC) in up to 1,700 gallons of water at a flow rate of 0.75 gallon per minute (gpm). The filter has a maximum operating pressure of 125 pounds per square inch (psi), and a maximum operating temperature of 100 degrees F (37.8 degrees C). This carbon filter cartridge is used for treatment of residential and commercial drinking water.
Chlorine reduction capacity 1,700 gallons at 0.75 gpm
Maximum pressure 125 psi
Maximum temperature 100 degrees F (37.8 degrees C)
Maximum dimensions (H x W) 20 x 4-1/2 inches (508 x 114 mm)
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.